Mahlkonig VTA6S FC, Руководство по эксплуатации

Страница: 12 / 16

|
L A D E N M Ü H L E N S H O P G R I N D E R S
5. Clean the entire grinder using a fi ne brush and remove any foreign
objects.
No coffee residues may adhere to the surfaces where
the grinder casing and the grinder casing cover lie on
top of one another when you put the grinder back to-
gether again.
6. Put the grinder casing cover and the grinder casing back together
again and fi x with 3 screws (in the case of the old model attach the
nuts and clamps on the side again).
7. Place the top part in position and make sure that the stop lever is
pushed through the slot. By turning the top part to the right or to
the left, engage the cut-out in the top part into the associated spac-
er block on the lower part.
8. Fit the clamps correctly and tighten the star handles / round han-
dles.
Labelling: UNTEN (German) = bottom
9. Move the grind adjustment lever into position “1” and connect to
the electricity supply again.
Casing cover
(new model)
Cover screws
Grinding disc
* simply remove screw on both sides (same function as the screws of the cover)
Casing cover
(old model)
Nut with clamp*
Grinding disc
12