Mahlkonig E80S, Инструкция по эксплуатации

Страница: 20 / 44

Operation
NOTE!
Danger of overheating!
Exceeding the maximum permissible operating cycle can cause the
grinder to overheat.
– Do not exceed the maximum operating cycle (see the section
“Technical data”).
– Observe the recommended pause when the maximum permissi-
ble operating cycle is reached (see the section
“
Technical data
”
).
• The grinder has a thermal overcurrent circuit-breaker which
interrupts the electric circuit of the grinder in case of electri-
cal overload.
To put the grinder into operation again, set the on/off switch
(5) to switch position 0 (off).
Then press the release button (6) .
You can switch the grinder back on by setting the on/off
switch to switch position I and putting the grinder into opera-
tion (see chapter “Troubleshooting”).
• The grinder also has a motor protector, which switches off
the grinder when the motor becomes too hot.
As soon as the motor has cooled down, the grinder can be
operated again (see the section “Troubleshooting”).
NOTE!
Risk of damage!
The operator has no influence on the thermal overcurrent circuit-breaker.
If the thermal circuit-breaker has been triggered several times, an
authorised service partner must be contacted for advice as the motor
winding can become damaged.
E80S | EN ESPRESSO GRINDER
20