Mahlkonig E80S, Инструкция по эксплуатации

Страница: 14 / 44

Safety
Intended use
The grinder is only suitable for grinding whole roast espresso beans. Do not
use the grinder to grind other products or objects.
The grinder is intended for commercial use but not for continuous mass
production. The grinder may only be serviced by trained personnel. It may,
however, be operated by other persons in a place where use is supervised.
Any other use is not considered to comply with the intended use and can
result in material damage or even personal injury. Do not make any modifi-
cations to the grinder. The manufacturer or supplier cannot be held liable for
any injury or damage resulting from failure to comply with the safety instruc-
tions.
Safety information
WARNING!
Danger of electric shock!
Improper use, incorrect electrical installation or an excessively high
voltage can all lead to electric shock.
– Connect the grinder only if the mains voltage of the socket com-
plies with the information indicated on the type plate.
– Connect the grinder only to a socket with good accessibility, so
that you can disconnect it quickly from the power supply in the
event of a fault.
– Do not use the grinder if you notice any visible damage or if the
power cable or plug is faulty.
– If the grinder power cable is damaged, it must be replaced by
the manufacturer or by qualified personnel in order to avoid
hazards.
– Do not operate the grinder without an earthed connection.
– Connect the grinder only to a power supply with a 16 A-slow
back-up fuse or a 15 A load fuse (USA). Have the 16 A-slow
back-up fuse or 15 A load fuse fitted by a qualified electrician if
the power connection at the installation location of the grinder
is not protected in this way.
E80S | EN ESPRESSO GRINDER
14