Mahlkönig Tanzania, Руководство по эксплуатации

Страница: 16 / 28

|
L A D E N M Ü H L E N S H O P G R I N D E R
NOTICE
Use a vacuum cleaner to remove any coffee beans from the grinding
chamber before replacing the bean hopper. The bayonet coupling has to
be clean and free from foreign material in order for it to close correctly.
9.1.2 Cleaning the grinding mechanism
CAUTION
The grinding discs must not be removed until the machine is completely
at rest! Before beginning this task, switch off the machine and pull out
the mains plug from the mains socket.
Procedure:
1. Disconnect the mains plug from the power outlet.
2. Remove the bean hopper as described in section 9.1.1 “Removing /
Replacing the hopper.
3. Lift and remove the cover plate (1) from the machine.
4. Use a (size 4) screwdriver to unscrew
the 3 screws (2).
5. Remove the stationary disc fl ange (3)
including the spout from the machine.
6. Clean the grinding discs (4) and re-
move any foreign matter. Please read
section 9.1 “Cleaning”.
7. Check the condition of the grinding
discs and insert new ones if they are
defective or worn.
8. Reassemble all the parts in reverse or-
der.
9. Replace the bean hopper as described in section 9.1.1 “Removing /
Replacing the hopper”.
HINT
Ensure that the mating surfaces are absolutely clean before reassembly!
Failure to do so will result in inconsistent grinds.
10. Reconnect the grinder to the power supply after complete reas-
sembly.
11. Turn the adjusting knob to coarse. In this way the discs cannot
be damaged in case of wrong assembly.
12. Switch-on the grinder and slowly turn the adjusting knob to
fi ne.
1
4
2
3