Mahlers Wasp G1, Инструкция по эксплуатации

Страница: 28 / 40

28 (40) Bruksanvisning Geting G1_B_EN
When repairs and maintenance are complete the entire working area and
sweeper should be cleaned.
Always wear safety gloves when handling oils and
grease.
Remember that hand tools can produce high noise levels.
6.1 Lubrication
Lubricants
The sweeper is supplied with Texaco Rando HDZ 32 hydraulic oil and
Texaco Multifak EP2 grease. Lubricants of equivalent quality from other
manufacturers may be used.
Clean the grease nipples and grease gun carefully
before carrying out maintenance. This is to prevent
dirt from getting into the bearings. Lubrication
equpment should be stored so that it remains clean
at all times.
Lubrication recommendations
Use grease with good adhesion and water resistance. Maintain cleanliness
so that dirt does not get into bearings. Lubricate exposed sliding surfaces
with oil.
6.2 Maintenance
measures and
intervals
Maintenance after 50 hours of use
Location Measure Remarks
Hydraulic oil filter First replacement
Oil in pump gearbox First replacement 80W/90
Hydraulic hoses Inspect Replace damaged hoses as
needed.
Daily
Location Measure Remarks
Entire sweeper* Washing
WARNING
!
NOTE
!