MAHLE NitroPRO NTF-515B, Руководство по эксплуатации

Страница: 7 / 20

© MAHLE
Information | NTF-515B | 7 NTF-515B | 7 | 7 en
1.4 Safety regulations
1.4.1 NTF-515B
Always carefully study and follow all the safety regulationsbefore
using the MAHLE product. Correct use of the NTF-515B is im-
portant for your personal saftey and for trouble-free functionality.
Incorrect use can cause damage to the unit or lead to incorrect
functionality.
Nitrogen can cause suffocation. Make sure there is
adequate ventilation at all times!
y Regular maintenance should be performed on the NTF-515B
to ensure proper and safe operation. Ensure that instruc-
tions concerning health and safety are compliant with local
regulations.
y
Some shop air supplies have an oiler installed to provide
lubrication to air tools. The life of the NTF-515B filters will be
increased if the air supply is free of moisture and oil.
y Only supply the NTF-515B with compressed air.
Oxygen enriched air leads to increased risk of fire in
the event of contact with flammable products.
y Do not block the flow of air from the membrane vent. Dam-
age may occur.
y Always follow vehicle manufacturer's suggested tire inflation
pressure.
y Incorrect settings on the NTF-515B can allow overinflation of
tires leading to a possible bursting of the tire.
y
Do not install the NTF-515B in an area where explosive sub-
stances may be present.
Ensure the feed air pressure cannot exceed 150PSI.
y
Keep ambient air temperature between 40˚F - 110˚F (5˚C -
43˚C). Do not connect hot compressed air directly from a
compressor to inlet of the NTF-515B.
y
Keep air feed to the NTF-515B clean and free of vapors of
organic solvents and other contaminants. Do not place the
NTF-515B in a room where organic solvent vapors may be
present.
y Oil content of the compressed air should be less than 0.01mg/
m
3
.
y
Ensure that the compressed air pressure and quality is always
as prescribed.
y
Ensure air supply is rated for 100-150PSI and minimum
13.3CFM.
y
The NTF-515B unit should not be exposed to excess moisture
or be operated in wet areas.
In the case of an emergency, turn off power switch
and disconnect the compressed air supply line quick
coupling.
y The NTF-515B can be secured in position by locking the
caster brake.
y There are no additional safety systems for protecting the
NTF-515B against damage resulting from natural catastro-
phes.
y Never remove any components from inside the NTF-515B
except for maintenance or repair purposes.
y Follow the pertinent legal regulations or directives to ensure
safe handling of pressurized devices.
y
The NTF-515B must be subjected to regular maintenance by
service personnel or authorized agents to ensure the safety
of the unit.
y Never perform any maintenance work which is not expressly
recommended in this manual. Contact customer service if
components have to be replaced other than in the course of
maintenance work.
y
If there is damage to the NTF-515B, terminate usage imme-
diately and contact customer service.
y The service hoses and service quick-release couplings must
be regularly checked for wear and replaced if damaged.
y Observe local laws or directives as to ensure the safety of the
pressurized device.
1.5 Technical data
Feature Value/Range
Dimensions H x W x D 1250 x 510 x 560mm
Weight 108kg
Unit operating voltage 12VDC
Battery charger voltage 110/220VAC
Air supply 100-150PSI, 13.3 CFM
Storage tank capacity 15gal