MAHLE NitroPRO NTF-515B, Руководство по эксплуатации, Страница: 13 / 20

© MAHLE
Product description | NTF-515B | 13 NTF-515B | 13 | 13 en
2.7 Commissioning
t
All the operations described in this section must be
performed prior to first use.
2.7.1 Removing transportation packaging
m
When removing the packaging, use care to ensure there is no
damage caused to the NTF-515B unit or any of the included
accessories.
t
Do not unplug any electrical connections and only have in-
ternal components opened and repaired by trained customer
service personnel.
t
Contact customer service in the event of any transportation
damage.
m
Charge battery for at least 5 hours prior to first use.
2.7.2 Verify air source
m
Ensure the compressed air source meets the specifications:
—
Oil content is below 0.01mg/m
3
—
Minimum air inlet pressure of 120PSI
—
Maximum air inlet pressure of 150PSI
—
Air flow is 13.3CFM minimum
—
Air temperature is below 110F
m
If your application requires an inlet pressure of 100-119PSI,
the pressure value can be adjusted to accomodate the lower
system pressure. Contact MSS Technical Support at 1-800-
468-2321 for details.
2.7.3 NTF-515B
m
The NTF-515B is designed for 12VDC operation. The charger
is designed for 110-240V, 50/60Hz. Follow the information on
NTF-515B rating plate.
2.7.4 Generating nitrogen
t
Before the NTF-515B can be used to service tires, the unit
must generate nitrogen to fill the internal tank.
t
An inadequate inlet pressure may make efficient filling of the
internal tank impossible.
m
Generally speaking, the inlet pressure should be at least 5PSI
higher than the tank set pressure (120PSI).
1. To fill internal bottle, connect air supply to inlet connection on
back of unit (Fig. 2, Pos. 9).
2. Turn purity selector valve (Fig. 2, Pos. 6) to desired setting.
3. Turn power switch to the On position.
t
The current pressure inside the nitrogen tank is indicated on
the lower LCD screen.