© Copyright Mahindra and Mahindra Ltd. 012019
2-21
R
Reeaarr jjaacckk uupp ppooiinntt --
On the side sill in-between the groove available
on the sill cladding just in front of the rear wheels.
Make sure to instal the jack so that its upper plate is correctly
seated under the vehicle’s positions marked in the figure for the
flat tyre side.
2
2..1
10
0..1
1 JJaacckkiinngg
Position the jack at the correct jacking point. Make sure the jack is
positioned on a level and solid ground. Ensure no one is in the
vehicle.
Block the wheel diagonally opposite the flat tyre to keep the vehicle
from rolling when it is jacked up. When blocking the wheel, place a
wheel block in front of one of the front wheels or behind one of the
rear wheels.
A : Flat Tyre
B : Chock Blocks
To raise the vehicle, insert the jack handle end along with the wheel
spanner into the jack and turn it clockwise with the jack handle. As
the jack touches the vehicle and begins to lift, check that it is
properly positioned. Raise it high enough so that the spare tyre can
be installed. Remember, you will need more ground clearance when
putting on the spare tyre than when removing the flat tyre.
Make sure to set the jack properly in the jacking point. Raising
the vehicle with an improperly positioned jack will damage the
G
GEEN
NEER
RA
ALL