Mahindra Jivo 245 DI, Руководство по обслуживанию

Страница: 55 / 87

REAR AXLE CARRIER ASSEMBLY
& MOUNTING PROCESS
TRANSMISSION MAIN LINE ASSEMBLY
5 8
Insert Rear Axle
assembly in
Rear axle casing
sub assembly
Insert shims
(A) and fix lock
washer (C) along
with roll pin
(B) & lock plate
(D) in bull gear
Dock (LH + RH)
RAC to Rear hous -
ing with 6 bolts (9)
on each side with
torque (60-70)
Nm & sealant 515.
Mount axle
mounting bolt (1)
on bull gear with
torque of 118-
125 Nm. With
torque wrench
Insert bull gear
(6) LH & RH in
rear housing and
mount it on re -
spective rear axle
6 9
10 7
Fix RAC retain-
er with 4 bolts
(13) to RAC &
Apply Torque 15-
20 NM to bolt.
REAR AXLE CARRIER ASSEMBLY CRITICAL SETTINGS
For ‘Rear axle preload’, tie the rope
in the shown area ‘A’ ‘A’.
Preload should be measured with -
out oil seal (11) in Retainer(12)
Rear Axle bearing Preload should
be within range of 1.5 to 3.2 Kg
If the bearing preload is not with -
in the desired value adjust shims
accordingly.
If preload is more add the shims
and if preload is less remove the
shims.
55