Mahindra Jivo 245 DI, Руководство по обслуживанию

Страница: 32 / 87

HUB END -ASSEMBLY PROCESS
4WD FRONT AXLE ASSEMBLY
SWIVEL HOUSING SUB ASSEMBLY
1 4
Assemble the
Ball Bearing
30x62x16 (11) on
Bevel Pinion Fi-
nal Reduction
(32). Fit pair in
Swivel Housing.
A s s e m b l e
the Bearing
50X80X16 (38) in
Swivel Housing
A s s e m b l e
the Bearing
45X75X16 (36) in
Swivel Housing.
NOTE- Loctite
638 to be ap-
plied on outer
race of bearing
Assemble the cir-
clip (30) after fit -
ment of bearing
in Swivel Housing.
Ensure free rota-
tion of circlip af -
ter fitment in slot.
Fix the Circlip In-
ternal 75D (37)
to Swivel Housing
2 5
6
3
Press the Cas-
sette oil seal
56X80X13.5 (39)
in Swivel Housing
with the help of
suitable dolly
3 2
HUB END ASSEMBLY CRITICAL SETTINGS
2
On hub housing, measure the GAP from bearing top to hub
housing flange using tool “AGFAYNMG 004”
For Example-
Master height = 35.00 mm
Measured reading = - 0.204 mm
GAP = 35.000 – 0.204 = 34.796 mm
⚠
Ensure free rotation of bearing rollers after assembly
Assembly should be free from dust and foreign particles
Apply grease during assembly of oil seal only
Grease to be filled in slingers
NOTE:-
⚠