Mahindra AX AC 4S ST, Руководство пользователя, Страница: 36 / 337

© Copyright Mahindra and Mahindra Ltd. 112020
2-17
A
Flat Tyre
B Chock Blocks
To raise the vehicle, insert the jack handle end along with the
extension into the jack and turn it clockwise with the jack handle. As
the jack touches the vehicle and begins to lift, check that it is
properly positioned. Raise it high enough so that the spare tyre can
be installed. Remember that you will need more ground clearance
when putting the inflated spare tyre than when removing the flat
tyre.
Make sure to locate the jack properly in the jacking point.
Raising the vehicle with an improperly positioned jack will
damage the underbody of the vehicle and may allow the vehicle
to fall off the jack and cause personal injury.
• Use the jack only for lifting the vehicle during wheel changing
• Do not raise the jack with any person inside the vehicle
• When raising the vehicle, do not place any objects on top of
or underneath the jack
• Raise the vehicle only high enough to remove and change
the wheel
• Follow jacking instructions
• Do not start or run the engine while your vehicle is
supported by the jack
Never get under the vehicle when the vehicle is supported by
the jack alone.
Remove the wheel nuts. Remove the flat tyre straight off and then
place it aside. Roll the spare wheel into position and align the holes
of the disc/drum with the nuts. Lift the wheel and hand tighten the
top wheel nut. Wiggle the wheel and press it back over the other
nuts.
Re-install the wheel nut with the tapered end inward and tighten by
hand. Press the wheel inward and tighten the wheel nuts further.
Before lowering the wheel hand tighten the nuts in diagonal
sequence so that wheel is flush against the hub/drum
A
B
U42B39
G GE EN NE ER RA AL L