Mahindra AX AC 4S ST, Руководство пользователя, Страница: 223 / 337

13-14
© Copyright Mahindra and Mahindra Ltd. 112020
efficiencies will be drastically reduced. Even the windshield/
windows may begin to mist/fog-up easily.
To maintain optimum HVAC system performance, replace the filter
element as per recommended maintenance schedule. However
while operating in highly dusty or polluting conditions, the filter may
require early replacement. If the air flow seems to have
considerably reduced, get the filter cleaned/replaced immediately.
To access the filter, open the glove box, remove the rubber pins on
both sides of the glove box lid. Un-clip the filter retaining clip and
remove the filter straight out. Clean the air filter or [in case of
paper/pollen element. In case of mesh filter (replace if found
damaged)] and follow the reverse procedure for putting the filter
back.
Never operate the HVAC system with the filter removed. This
may result in premature failure of system components.
1 13 3..7 7 R Ra ap piid d C Ca ab biin n C Co oo olliin ng g
For rapid cooling of the cabin, the following AC settings are
recommended:
1.
Make sure that all the windows are fully closed
2.
Set the blower to maximum speed
3.
Turn the air conditioner ON
4.
Fully open the vents and adjust louvers to direct air toward
face
5.
Set the air distribution control to face mode
6.
Set air intake control to recirculation mode
7.
Set the temperature control knob to the extreme left (coolest)
position
Once the passenger compartment reaches a comfortable
temperature, the blower speed and temperature control knob can
be readjusted as desired.
If your vehicle was parked in the hot sun with all the windows
closed, drive the vehicle with windows open for the first few
minutes. This will help in venting the hot interior air out and
allow the air conditioner to cool the cabin quickly.
1 13 3..8 8 R Ra ap piid d C Ca ab biin n H He ea attiin ng g
For rapid heating of the cabin, the following AC settings are
recommended:
1.
Make sure that all the windows are fully closed
2.
Set the blower to maximum speed
3.
Set the air distribution control to foot mode
4.
Set air intake control to recirculation mode
H HE EA AT TIIN NG G,, V VE EN NT TIIL LA AT TIIO ON N A AN ND D A AIIR R--C CO ON ND DIIT TIIO ON NIIN NG G S SY YS ST TE EM M ((H HV VA AC C)) ((IIff e eq qu uiip pp pe ed d))