Mahindra 3535, Руководство оператора

Страница: 82 / 108

35 Series-HST, Model - 3535, 4035, 4535 & 5035
81
Note : If diesel fuel with sulphur content greater
than 0.05% is used, reduce the service interval
by 50%.
Note : It is not necessary to change the
lubricant when the temperature enters into a
different range during a working day, unless
difficulty in starting is experienced.
Change oil if the tractor is not used for
6 months.
PRECAUTIONS :
After changing the oil, operate the engine at
low speed without load, for at least 5 minutes.
This will allow the oil to work into the bearings
and onto the cylinder walls.
* Factory filled oil is 15W40 and may change in
future.
* Factory filled oil is Enclo 46 and may change
in future.
Lubrication Oil
Engine Oil
Refer table A for oil specifications. Other oils can be used
if they meet minimum requirement of :
API service classification CF4 + Mb228.1
CCMC D-4 / G-4 / PD-2
MIL - L - 2104E.
Multi-Viscosity Diesel Engine oils are preferred.
Selecting the Viscosity of Engine Oil (EO)
During cold weather the selection of oil should be based on
the coldest anticipated operating temperature to make
starting easier.
During hot weather, selection should be based on the
highest anticipated operating temperature.
When the prevailing temperature changes substantially,
even though the regular intervals of lubricant change have
not been reached, the lubricant must be changed.
Refer Oil Specifications Chart for oil specifications at
different range of ambient temperatures.
Ambient temperature conditions in other range warrants
other SAE grade of oil as per illustration.