Mahindra 3535, Руководство оператора

Страница: 71 / 108

35 Series-HST, Model - 3535, 4035, 4535 & 5035
70
Fuel Filter
This filter provides clean, moisture free fuel for the injection
process. A hand primer is provided to manually remove
excess air from the fuel filter and fuel lines.
Major Components:
• Hand Primer (F)
• Air Bleeding Screw (G)
• Fuel Filter (D)
Fuel enters the filter at inlet (A) and flows through the filter
element separating water it contains before flowing
through outlets (B) to the fuel injection pump.
Since water and contaminants settle at the bottom of
the sediment bowl, a drain plug is provided at the
bottom of the filter. Drain water in fuel, by loosening
drain plug once every 50 hrs. of operation.
To drain water in fuel, loosen the drain plug upto 1 or
2 turns. During loosening drain plug, place a small
tray to collect the water coming from pipe (C).
Retighten the drain plug by hand.
Servicing the fuel filter
1. It is recommended to replace the fuel filter every
500 hrs.
2. To remove Filter, unscrew the filter (D) from adaptor (E).
3. Check O'rings of fuel filter for any crack / damage.
Smear oil on the new O'ring before installation.
4. Clean the adaptor with clean diesel from inlet and
outlet. Ensure no dirt, foreign particles entangled in flap
valves or filter head.
5. Assemble the new filter. Do not over tighten.
6. Prime the system and bleed the filter. Tighten the
bleeding screw.
Fuel System
Note : Drain water once in a week or earlier if
water contamination is excessive. Continued
driving with water accumulation in fuel filter
will cause damage to fuel pump / other fuel
system components.
Note : Replace fuel filter at the recommended
period or whenever it gets clogged. Discard the
old filter and do not repair or clean the filter.
Always fit the spin-on filter dry.
Tractor Front
F
A
D
C
B
G
E