26
BA551601-en
Error
Cause
Remedy
Air motor initially runs at
idle stroke (typical noise),
but becomes increasingly
slower under load and
then stops completely
Air motor runs dry; no oil
in the maintenance unit
Refill oil
Air pressure too low;
local cause
Contact service
Air motor first lifts the
load a certain height and
then pumps through
empty
Too low oil level on the
jack due to transport
damage or natural
consumption
Refill oil
Air motor first lifts the
load a certain height and
then becomes
increasingly slower
Air filter clogged; dirt
from the piping system
Cleaning
Air pressure too low;
local cause
Contact service
Air volume too low; local
cause
Contact service
Air motor first lifts the
load a certain height and
then slows down to a
standstill
Air pressure too low;
local cause
Contact service
Air motor runs very
slowly even when idling
Air filter clogged; dirt
from the piping system
Cleaning
Air motor runs dry; no oil
in the maintenance unit
Refill oil
Air pressure too low;
local cause
Contact service
Air motor does not run at
all
Air filter completely
clogged; dirt from the
piping system
Cleaning
Air motor runs dry, stops;
no oil in the maintenance
unit
Refill oil
Air motor defective
Exchange
Air-rapid control does not
work
Air filter clogged; dirt
from the piping system
Cleaning
Pneumatic control line
clogged or kinked
Contact service
Lifted load lowers
Lowering spindle not fully
closed; spring does not
close completely
Close lowering spindle;
contact service
Содержание MPJ-1S Series
