18
BA551601-en
•
It is not permitted to work under the lifted load unless it is secured by suita-
ble means (DIN EN 1494).
•
The lifter must always be moved with both hands. If the required manual
forces cannot be provided by one person, another person must be called in.
•
Operators must ensure that they do not endanger themselves or others dur-
ing all movements of the pit lift.
•
If the floor is uneven in the area of the lifter, it must be secured against rolling
away.
•
Use of the jack on a surface with a slope of more than 1° is not permitted.
•
No tools or other objects may be placed on the load suspension means of
the jack.
•
The gear unit jack may only be moved with a load when it is retracted. It must
be ensured that the load is picked up at the center of gravity of the compo-
nent and secured in a suitable manner on the load handling attachment (e.g.
by lashing straps).
•
When installing and removing heavy vehicle components (en-
gine/aggregates), the center of gravity position may change. In this case,
suitable measures (determination of the center of gravity, control of the pick-
up point) must be taken to prevent tipping before the jack is lifted again.
•
Before lowering, the operator must ensure that there are no objects in the
movement range of the jack and load.
•
Load handling attachments must not be deliberately set in vibration.
•
Since the chassis is not secured against tipping on the ground, side loading
is generally prohibited.
•
The oil level in the hydraulic system must be checked regularly by trained
personnel.
•
The completeness and legibility of the safety instructions on the siphon must
be checked annually.
•
In the event of malfunctions, the range of movement of the jack and load
must be secured. Take the lifter out of operation and notify customer service.
•
The operator must ensure suitable lighting conditions at the workplace.
•
In order to secure the lifter against unauthorized use, it is essential to dis-
connect the lifter from the compressed air supply or to shut off the com-
pressed air supply line at the end of operation.
•
The hydraulic components must be checked annually.
•
The safety features must not be replaced or overridden.
•
Troubleshooting is only permitted by authorized personnel.
•
Observe the notes on correct assembly and disassembly in the operating in-
structions.
Содержание MPJ-1S Series
