MAHA DUO GN Series, Оригинальная инструкция по эксплуатации

Страница: 16 / 37

12 BA081101-en
3.2 Controls
3.2.1 Operator's Controls
Description Symbol
Power (white signal lamp)
Lights up once lift is ready for operation.
Error (red signal lamp)
Lights up or flashes in the event of errors such as light barrier interruptions.
Axle Jack Position (orange signal lamp) [optional]
Only available with option "Floor Cover with Defined Axle Jack Position".
Lights up once axle jack is moved from its defined home position.
The lift can only be lowered to bottom position with axle jack in defined home
position.
Raise (button)
Press and hold this button to raise the lift. Lift stops once button is released
or upward travel limit is reached.
Lift stops if transverse light barrier (synchronization check) is interrupted.
Lift is inoperative until obstacle/error has been removed.
Lower (button)
Press and hold this button to lower the lift. Lift stops once button is released
or downward travel limit is reached.
For lifts equipped with Set-on-Locks function: Lift slightly raises to disengage
the locking latches before lowering cycle starts.
Lift stops if one of the longitudinal light barriers or the transverse light barrier
is interrupted. Lift is inoperative until obstacle/error has been removed.
Lighting (switch) [optional]
Use this switch to turn on and off the runway lighting.
Set on Locks (button/green signal lamp) [optional]
Locking latch engages nearest serration.
The signal lamp will not light up until the main cylinders (and the inclination
cylinders) are depressurized.
Enable Runway Inclination (button) [optional]
Use this button to activate the hydraulic runway inclination for vehicles with
low ground clearance.
Disable Runway Inclination (button) [optional]
Use this button to reset the runways to their horizontal position.