MAHA DUO CM Series, Руководство по эксплуатации

Страница: 8 / 45

8
BA082901-en

Lifts with runways: modifications (such as usage of extensions) are permissible only
under the condition that the functionality of the roll-off protection is maintained
(protective position of ≥ 0.1 m above the runways).

The load rating on the identification plate must not be exceeded.

Keep the path of movement free of obstructions.

Only use the vehicle manufacturer's recommended lift points.

Only use lifting supports approved by the vehicle manufacturer.

The vehicle must be lifted as a whole. usage of external hoisting and support devic-
es in combination with the lift must be approved by the manufacturer.

Do not use the lift for transporting persons.

Lifts with support arms or wheel-free jack: when raising the lift, all support points at
the vehicle body must be engaged at the same time.

Lifts with support arms or swing arm jack: use one additional extender or one sup-
port block only for each support point.

Lifts with support arms or swing arm jack: check arm restraints for secure engage-
ment as soon as support arms contact vehicle lift points.

Lifts with wheel-free jack: secure engagement of the vehicle must be ensured by
using appropriate means (e.g. lashing straps).

After raising the vehicle briefly, stop and check the lift supports for secure contact.

Make sure the vehicle doors are closed during raising and lowering cycles.

Make sure the parking brake is applied during raising and lowering cycles.

Closely watch lift and vehicle during raising and lowering cycles.

Do not allow anyone to stay in lift area during raising and lowering cycles.

Lifts with support arms or wheel-free jack: after setting down the vehicle, check the
lift supports for secure contact before raising the vehicle again.

Axle lift (if present): observe the installation instructions. Use both hands when
moving the axle lift. The axle lift must be in park position during raising and lower-
ing cycles.

Axle lift (if present): the vehicle must be additionally secured against rolling off
while one axle is in a raised position.

Do not allow anyone to climb up the lift or the raised vehicle.

Before leaving the lift, fully lower the vehicle or secure it against accidental lower-
ing.

Keep lift and vehicle free of tools and parts.

Keep the lift and lift area clean. Risk of slippage on oily floors!

The main switch serves as emergency stop switch. In case of emergency turn it to
“0”.

Protect the lift against unauthorized usage by padlocking the main switch.