MAHA DUO CM Series, Руководство по эксплуатации

Страница: 7 / 45

7
BA082901-en
1.6 Safety Instructions for Commissioning
WARNING

The lift shall be installed and commissioned by authorised service personnel only.

Use personal protective equipment.

All safety features must be checked for proper function at commissioning.

The control desk (if present) shall not be installed in the danger zone of the lift.

The standard lift version shall not be installed and commissioned in hazardous loca-
tions, outdoors, in moist rooms (e.g. car wash) or outside a temperature range of
5…40 °C (41…104 °F).
1.7 Safety Instructions for Operation
WARNING

Observe the detailed operating instructions.

Observe all accident prevention regulations.

Use personal protective equipment.

The standard lift version shall not be operated in hazardous locations, outdoors, in
moist rooms (e.g. car wash) or outside a temperature range of 5…40 °C (41…104 °F).

To ensure safe operation, check the functionality of all safety devices before using
the lift.

The control desk (if present) must be positioned in such a way that there is an un-
obstructed view to the complete working area and the emergency stop can be ac-
cessed at all times.

All structural parts of the equipment must be visually checked at regular intervals.

Supply of suitable illuminating devices is the owner's/operator's responsibility.

Do not allow anyone to stay in the danger zone when driving on or off the lift.

Lifts with cylinder and runways: when lifting vehicles with a short wheelbase, make
sure that one axle is in front of the lifting cylinder, the other behind it.

Lifts with wheel-free jack: before driving on or off the lift or wheel-free jack, make
sure the jack is in bottom position.

If the operator is unable to see all parts of the danger zone, a trained second person
must monitor such areas.

Center the vehicle on the lift when it is in fully lowered position.

After positioning the vehicle on the lift secure it against roll-off.

Lifts with runways: make sure the vehicle tyres do not contact the roll-off protec-
tion when raising or lowering the lift.