MAGUIRE LPD-30, Установка, эксплуатация и обслуживание

Страница: 38 / 127

Maguire Products, Inc.
Edition: November 5, 2010
38
LPD Dryer
®
Star Functions – Full Explanations
Clears the Alarm Log
Press ( ,0,5) to clear the alarm log. See 35 for information about the
alarm log.
Select Date Format, Set current Date and Time
Press ( ,1,1) to enter the correct date and time into the real-time clock.
Correct date and time is helpful if you are retrieving information in a
USB drive printout. Six entries will be requested.
The first display will indicate USA or EUROPE date format. USA will
cause all dates to be displayed MONTH/DAY/YEAR. EUROPE will
cause all dates to display DAY/MONTH/YEAR. Use the CE key to
toggle from one to the other.
SELECT DATE FORMAT
USA (MM/DD/YYYY)
SELECT DATE FORMAT
EUROPE (DD/MM/YYYY)
Press to view or change the month, day, year, hour, minute.
The remaining five entries are two digits each;
MONTH __, DAY __, YEAR __, HOUR __, MIN __.
Use the key to step through all fields without change. Enter new
settings where required. The correct date and time for Eastern
Standard Time were entered at the factory. You will want to correct this
for your time zone. After entering the minutes, the controller will exit to
program mode and save the changes to date and time. Press Exit
again to exit out of Program Mode.
Restore Factory Default Settings
Press ( ,1,2) to restore the Dryer’s hard-coded factory default settings.
RESTORE FACTORY
DEFAULT SETTINGS
Pressing ,1,2 restores Factory Default Settings into “User Settings”
and “User Backup Settings” (retains certain important information). It
will not prompt for confirmation. Resets immediately after 12 is
pressed. Accessible in Program Mode Only
.
Auto Start – Disabled/Enabled
Press ( ,2,2) to select the Automatic Start option.
AUTO START
DISABLED
AUTO START
ENABLED
22 allows for a day / time automatic start of the dryer heating and
vacuum cycle, (the same as pressing the START button).