Magtek IntelliStripe 65 Скачать руководство пользователя | Manualshive

Страница: 10 / 44

background image

IntelliStripe 65, USB/RS-232 Insertion Reader

2

Part

Number

Description

21165042 North American Plastic Bezel

21165043 No SAM socket; No security gate; North American Plastic Bezel

21165044 Contactless smart card ready*; International Plastic Bezel

21165046 Same as 21165044 but with Contactless smart card module and antenna installed

21165047 No SAM socket; Contactless smart card ready*; no bezel (front and side mounting

configuration—suitable for metal bezel)

21165048 International Plastic Bezel

21165051 No latch (but motor is supplied for tamper protection); no bezel (front and side mounting

configuration—suitable for metal bezel)

21165052 No gate; no latch, no bezel (front and side mounting configuration—suitable for metal bezel)

21165053 No bezel (front and side mounting configuration—suitable for metal bezel)

21165056 Single 3-track head with ground lug; North American Plastic Bezel

21165058 Contactless smart card ready*; North American Plastic Bezel

*

Contactless module, antenna and cable must be ordered separately

ACCESSORIES

Other part numbers that may be shipped with the unit include the following:

Part

Number

Description

16051408

RS232 / Power cable

−

6 foot, IntelliStripe 65 host port to 9-pin D female RS232 and 2.5mm

power jack

16051430  USB-A to USB mini-B cable (white)
16051433  USB-A to USB mini-B cable (gray)
30037472  Demo Software, IntelliStripe Picture Demo (CD)
30037473  MagTek MCP Drivers (CD)
51300004  OTI Contactless communication module (mounts on “Contactless Ready” models
51300005  OTI Contactless antenna (must be mounted away from IntelliStripe 65 bezel)
51300006  OTI coax antenna cable – 30cm (does not support LEDs)
51300007  OTI ribbon antenna cable – 19cm (supports LEDs)

64300080

Power Supply – Auto-ranging 100V-250V, regulated, 12VDC, 2.5mm plug. Requires adapter
to mate with power outlet; use Adapter/Power Cord (P/N 71100001) for North American
applications.

71100001

Power Outlet Adapter/Cord for North American applications (used with part number
64300080)

99510015 Demo Software, IntelliStripe Picture Demo (Web – ref www.magtek.com)
99510016 MagTek MCP Drivers (Web – ref www.magtek.com)

RELATED DOCUMENTS

This document (P/N 99875339) is from a hardware perspective only. Other MagTek documents
that cover the command set, communications protocol, and API (Application Program Interface)
are as follows:

«
...
8
9
10
11
12
...
»

Содержание IntelliStripe 65













































Отзывы:

Нет отзывов

Похожие инструкции для IntelliStripe 65

Network Video Recorders

Бренд: e-Line Technology Страницы: 34

Бренд: National Instruments Страницы: 9

FIELDPOINT FP-1600

Бренд: National Instruments Страницы: 8

Бренд: Salusfin Страницы: 6

Бренд: F5 Страницы: 72

F-ZTAT H8/3048 Series

Бренд: Renesas Страницы: 34

PARTNER Voice Messaging PC Card Release 2

Бренд: Lucent Technologies Страницы: 67

Бренд: Cromemco Страницы: 46

Бренд: Verizon Wireless Страницы: 39

Active Module Carrier VX402C-64

Бренд: C&H Страницы: 32

Бренд: Juniper Страницы: 7

Бренд: IBASE Technology Страницы: 39

Бренд: AXAGO Страницы: 2

Бренд: 3Com Страницы: 53

Wisenet PRN-6400DB4

Бренд: Hanwha Techwin Страницы: 125

Modular Fast Fiber Switch Converter MT-RJ

Бренд: Lindy Страницы: 3

MultiModem ISIHP-2S

Бренд: Multitech Страницы: 155

ExtremeCloud Appliance E3120

Бренд: Extreme Networks Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды