MAGSTIM NEUROSIGN V4, Руководство по обслуживанию, Страница: 41 / 50

The Magstim Company Ltd.©
41
NOP20-EN-03
• Remove the retaining screw from the rear
panel of the touch screen DCU ( right ).
• Remove rear panel by sliding downwards
(indicated by an arrow).
• Insert the keyboard USB connector into any
internal USB socket.
• Route the cable through the gap provided
at the bottom of the monitor case ( right ).
• Replace rear panel and secure with the
retaining screw.
• Set the power switch to ON (I) ( 20 , page
13).
To set the Keyboard language;
5.4 Keyboard Installation
Retaining
Screw
Internal
USB Sockets
Gap for
Cable Routing
• From the home screen, press ,
• Press ,
• Press ,
• Select the relevant flag for the required language.
Note: Before removing the retaining screws ensure that the nerve monitor is switched
off and disconnected from the AC mains supply.