MAGSTIM NEUROSIGN V4, Руководство по обслуживанию, Страница: 34 / 50

The Magstim Company Ltd.©
34
NOP20-EN-03
On start-up the nerve monitor will automatically run a connection and audio test.
Refer to the user manual for more information.
The nerve monitor must undergo annual electrical safety testing in accordance with
the hospital policy, as well as annual performance verification, once the gurantee
period has expired. More information can be found in "4.4 Servicing & Device Lifetime"
on page 31.
5.1 Testing Requirements
• Remove the retaining screw from the rear
panel of the touch screen DCU ( right ).
• Remove rear panel by sliding downwards
(indicated by an arrow).
• Remove the button cell battery from
the retaining clip ( right ) and dispose of
appropriately.
• Insert the new button cell battery ensuring
the positive (+) is facing outward.
• Replace the rear panel and secure with
retaining screw.
5.2 Battery Replacement
Retaining
Screw
Button Cell
Battery
• Connect the AC mains power lead to the power input socket ( 19 , page 13).
• Set the power switch to ON (I) ( 20 , page 13).
Note
: If language selection flags are displayed on start-up, the system configuration
must be completed. Refer to the user manual, "4.1 System Configuration" for more
information.
Note: Before removing the retaining screws, ensure that the nerve monitor is switched
off and disconnected from the AC mains supply.