MAGSTIM NEUROSIGN V4, Руководство по обслуживанию, Страница: 36 / 50

The Magstim Company Ltd.©
36
NOP20-EN-03
i. Touch screen DCU update troubleshooting
Problem Solution
After software update, the system does
not boot or is stuck showing the splash
screen (below).
Remove the SD card from the nerve monitor and
using a suitable SD card reader, connect the SD
card to a PC/laptop.
Navigate to the SD card and confirm that the file
“4503-62.BIN” is present in the root directory of the
SD card. If the file is named “4503-62-Vn.n” (where
‘n.n’ represents the software version of the update
being applied) rename the file to “4503-62.BIN”.
If the file is not present on the SD card, re-install
the software update on to the SD card and retry
the update.
Message box “Application is corrupted” is
displayed during start up (below).
Remove the SD card from the nerve monitor and
using a suitable SD card reader, connect the SD
card to a PC/laptop.
Navigate to the SD card and delete the file “4246-
62-Vn.n” (where ‘n.n’ represents the software
version of the update being applied).
Re-install the software update on to the SD card
and retry the update.
Message box “Application could not be
found” is displayed during start up (below).
Remove the SD card from the DCU and using a
suitable SD card reader, connect the SD card to a
PC/laptop.
Re-install the software update on to the SD card
using the files provided to you.
Confirm the file “4246-62-Vn.n) is present in
the root directory of the SD card (where ‘n.n’
represents the software version of the update
being applied) and retry the update.