System security functions
Automatic arming
Automatic recovery of arming
Automatic and remote switching of the alarm
Multizone security (up to 20 independent zones)
Built-in three-zone multi-layered acoustic impact sensor
Built-in three-zone multi-layered tilt sensor
Built-in three-zone multi-layered displacement sensor
Three-zone multi-motion sensor (optional)
Remote adjustment of sensor sensitivity
Automatic corrective adjustment of sensor sensitivity
Smart protection against false activation of sensors
Programming of alarm and alert signals
Switching on and off of sensors via a remote key fob or a phone
Diagnostics of the sensors when arming and in the armed mode
Anti-theft system functions
Built-in code immobilizer
Automatic and remote locking of the engine
Protection against
forcible
car theft with three ways of activation
Simulation program of vehicle's engine trouble
Engine blocking via an integrated power relay
Engine blocking via external N.C and N.O relay
System service functions
Service mode of system operation
"Search" and "Alarm" modes
"Light path" function
Vehicle's interior light
Remote control of the trunk lock
Automatic glass lifting and hatch closing
Turbo timer with manual and automatic start
Control of central door locking by means of ignition, parking and motion sensor
Automatic electric heating of SIM-card and GSM-module
Automatic engine starting
Automatic engine starting on any type of vehicle
Automatic engine starting via a phone or a smartphone
Automatic engine starting by interior temperature or engine temperature
Automatic engine starting at the vehicle battery discharging
Control of engine starting on the tachometer, voltage or on-board network
Universal inputs and outputs of engine starting control
M880
OPERATION MANUAL
3
Access to control of the security system
Procedures of the owner identification by entering a personal code are proposed to
prevent access to the control system of third-party persons.
Personal code can be used for emergency shutdown of the system, to control the sys-
tem by phone, to unlock the engine, to reset security programs against car theft, as well as
in those cases where it is necessary to produce certain changes in the functions and settings
of the system.
Factory setting of personal code is 1111.
Warning!
Using the installer is required to reprogram the PIN code from factory
settings on any your, individual or personal code.
For maximum efficiency of your vehicle protection, please, ensure confidentiality of
your of personal code.
Access modes to system control
One of four different access modes can be used to control the system via a phone:
Access Mode 1
- system control via only registered phones and only after entering of
personal code;
Access Mode 2
- system control without entering a personal code (direct control),
but only with registered phones;
Access mode 3
- system control with both registered and unregistered phones, but
only after entering a personal code;
Access mode 4 -
direct system control with registered phones and control with unreg-
istered phones after code entering.
Warning!
Access mode 3 is selected in the factory settings. It should be borne in
mind that in the case of change of access mode on the 1st or 2nd, you cannot operate the
system with the phones, not programmed in its memory.
Arming via a remote key fob
1. Park your vehicle and stop the engine.
2. Leave the vehicle and close all doors, hood and trunk.
3. If required single disable or enable of audio confirmation – press the remote key
fob button
.
4. Press the remote key fob button
- the system will give 1 sound and 1 light signal
or only 1 light signal, the engine will be blocked, and door locks will be closed and the sys-
tem will go into the armed mode - system LED will blink with a frequency of one flash per
second.
Note 1:
Sound and light signals of confirmation are programmable independently of
each other and can be changed by the installer.
Note2:
When arming the system can automatically lift the vehicle glasses, close the
door and activate other similar devices (option).
OPERATION MANUAL
M880
4
