TIG200L PRO AC/DC
12
7. Up slope
On 4T mode, the time from Start current to Peak
current
after
release
the
torch
trigger,
recommended setting is 3 seconds.
8. Peak current
User can adjust the thickness and the system will
recommend the peak current. If penetration is not
enough, you can adjust it higher, but if burning
through, adjust it lower and try again.
9. Pulse duty
On Pulse mode, the percentage of peak current in
a cycle
(
peak current time and base current time
)
,
recommended setting is 30%
。
10. Pulse frequency
On Pulse mode, it
’
s the switch speed from peak
current to base current, recommended setting is
10Hz.
Содержание TIG200L AC/DC PRO
Страница 1: ...OPERATION MANUAL TIG200L AC DC PRO...
Страница 28: ...TIG200L PRO AC DC 26 CIRCUIT...