MAGNUM WELDERS TIG200L AC/DC PRO, Руководство по эксплуатации

Страница: 18 / 29

TIG200L PRO AC/DC
16
6. Remote control
This welder can matched with remote torch. Turn it
on to activate remote control.
（
at the mean time
peak current on panel control will shut down.
）
7.Pre-flow
Before welding, drain out the air in the torch and
let the gas protect the welding line, recommended
setting 0.1-0.5 seconds.
8. start current
On 4T mode, the welding current of the first time
pull the trigger till to release it, recommended
setting is 50% of peak current.
9. Up slope
On 4T mode, the time from Start current to Peak
current
after release the torch trigger,
recommended setting is 3 seconds.