Magnum Industrial MI-31662, Руководство по эксплуатации

Страница: 3 / 34

1. The 24” planer is shipped in one container mounted to a shipping skid. Remove the wooden crate from
around the machine. The planer is shipped with the motor, motor pulley and belts assembled to the machine.
2. Finish removing the contents of the shipping crate and compare with the contents list. (Fig.2)
3. Report damage, if any to your local distributor.
4. Clean all rust protected surfaces with a mild solvent or kerosene. Do not use lacquer thinner; paint thinner, or
gasoline. These will damage painted surfaces.
5. To prevent rust. Apply a light coa � ng of paste wax to surface
KMS-TOOLS EQUIPMENT industrial planers are carefully tested and
inspected before shipment and if properly used will give perfect result. However, a
reasonable amount of care and attention is necessary to ensure perfect
performance and accurate work. It is imperative that you take a few moments to
familiar yourself with these instructions, as they will no doubt save you a lot of
time and trouble.
24” INDSUTRIAL PLANER
VARIABLE FEED SPEED
To ensure maximum performance from your 24” industrial planer , clean it properly; and install it accurately
before use. As soon as you receive the planer, we recommend you follow these procedures:
UNPACKING AND CLEANUP
A. CUTTERHEAD GUARD
B. DUST HOOD
C. SAFETY HANDLE
D. KNIFE SETTING GAUGE
E. 12 X 14MM OPEN END WRENCH
F. 10 X 8MM OPEN/ END WRENCH
G. T-HANDLE WRENCH
H. ALLEN WRENCH (4MM)
I. ALLEN WRENCH (5MM)
J. ALLEN WRENCH (6MM)
CONTENT LIST – Fig.2