Spe
Spe
Spe
Special
cial
cial
cial Safety
Safety
Safety
Safety Precautions
Precautions
Precautions
Precautions
•
•••
Power
Power
Power
Power source
source
source
source::::
•
Choose a place within reach of
a socket when placing the treadmill.
•
Always connect the appliance to a socket with a grounded circuit and no
other appliances connected to it. It is recommended not to use any
extension cords.
•
A faulty grounding of the appliance can cause the risk of eletrical shocks.
Ask a qualified electrician to check the socket in case you do not know if
the appliance is grounded appropriately. Do not modify the plug provided
with the appliance if it is not compatible with your socket. Ask a qualified
electrician to install a suitable socket.
•
Sudden voltage fluctuations can seriously damage the treadmill.
Whether
to change or switch on and off other appliances can cause peak voltage
s,
over-voltage or interference voltage. To limit the danger of damage to the
treadmill, it should be equipped with an over-voltage protective device (not
included).
•
This appliance is designed for use with ~220 - ~240 Volt rated voltage.
•
Keep power cord away from the
carrying roller.
Do not leave the power cord
below the
striding belt.
Do not use the treadmill with a damaged or worn out
power cord.
•
Unplug before cleaning or engaging in maintenance work. Maintenance
should only be done by authorised service technicians, unless otherwise
stated by the manufacturer. Ignoring those instructions would automatically
void the warranty.
•
Inspect the treadmill before every use to make sure that every part is
operational.
•
Do not use the treadmill outdoors, in a garage or under any kind of canopy.
Do not expose the treadmill to high humidity or direct sunlight.
•
•••
Never leave the treadmill unattended.
•
•••
If the supply cord is damaged , it must be replaced by the manufacturer , its
service agent or similarly qualified persons in order to avoid a hazard .
•
Make sure the striding belt is always tense. Start the striding belt before
stepping on it.
3