Maintenance
Maintenance
Maintenance
Maintenance
TREADMILL
TREADMILL
TREADMILL
TREADMILL MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
Proper maintenance is very important to ensure a faultless and operational condition
of the treadmill. Improper maintenance can cause damage to the treadmill or shorten
the life of the product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts
must be replaced immediately.
BELT
BELT
BELT
BELT ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
You may need to adjust the running belt during the first few weeks of use. All running
belts are properly set at the factory. It may stretch or be off center after use.
Stretching is normal during the break-in period.
ADJUSTING
ADJUSTING
ADJUSTING
ADJUSTING THE
THE
THE
THE BELT
BELT
BELT
BELT TENSION:
TENSION:
TENSION:
TENSION:
If the running belt feels as though it is “slipping” or hesitating when you plant you foot
during a run, the tension on the running belt may have to be increased.
TO
TO
TO
TO INCREASE
INCREASE
INCREASE
INCREASE THE
THE
THE
THE RUNNING
RUNNING
RUNNING
RUNNING BELT
BELT
BELT
BELT TENSION:
TENSION:
TENSION:
TENSION:
1. Place 8mm wrench on the left belt tension bolt. Turn the wrench clockwise 1/4
turn to draw the rear roller and increase the belt tension.
2. Repeat STEP 1 for the right belt tension bolt. You must be sure to turn both bolts
the same number of turns, so the rear roller will stay square relative to the frame.
3. Repeat STEP 1 and STEP 2 until the slipping is eliminated.
4. Be careful not to tighten the running belt tension too much as you can create
excessive pressure on the front and rear roller bearings. An excessively
tightened running belt may damage the roller bearings that would result in
bearing noise from the front and rear rollers.
TO
TO
TO
TO DECREASE
DECREASE
DECREASE
DECREASE THE
THE
THE
THE TENSION
TENSION
TENSION
TENSION ON
ON
ON
ON THE
THE
THE
THE RUNNING
RUNNING
RUNNING
RUNNING BELT,
BELT,
BELT,
BELT, TURN
TURN
TURN
TURN BOTH
BOTH
BOTH
BOTH BOLTS
BOLTS
BOLTS
BOLTS
COUNTER-CLOCKWISE
COUNTER-CLOCKWISE
COUNTER-CLOCKWISE
COUNTER-CLOCKWISE THE
THE
THE
THE SAME
SAME
SAME
SAME NUMBER
NUMBER
NUMBER
NUMBER OF
OF
OF
OF TRUNS.
TRUNS.
TRUNS.
TRUNS.
CENTRING
CENTRING
CENTRING
CENTRING THE
THE
THE
THE RUNNING
RUNNING
RUNNING
RUNNING BELT
BELT
BELT
BELT
When you run, you may push off harder with one foot than the other. The severity of
the deflection depends on the amount of force that one foot exerts in the relation to
the other. This deflection can cause the belt to move off- centre. This deflection is
normal and the running belt will centre when no body is on the running belt. If the
running belt remains consistently off-centre, you will need to centre the running belt
manually.
Start the treadmill without anyone on the running belt, press FAST-key until speed
reached 6kph.
1. Observe whether the running belt is toward the right or left side of the deck.
�
If toward the left side of the deck, using wrench, turn the left adjustment bolt
clockwise 1/4 turn and the right adjustment bolt counter clockwise 1/4.
�
If toward the right side of the deck, turn the right adjustment bolt clockwise
1/4 turn and the left adjustment bolt counter clockwise 1/4.
15
