Magnum Energy Mini Magnum Panel Скачать руководство пользователя | Manualshive

Страница: 11 / 70

background image

©

2012 Magnum Energy, Inc.

Page 2

Introduction

1.1 MMP Series Overview

The MMP enclosure is available in four basic con

fi

gurations. This section lists the four models and

the enclosure’s main components and features.

Individual Models:
• MMP175-30D

(Mini Magnum Panel, 175 ADC breaker, dual 30 AAC bypass/input breakers)

• MMP175-60S

(Mini Magnum Panel, 175 ADC breaker, single 60 AAC bypass/input breakers)

• MMP250-30D

(Mini Magnum Panel, 250 ADC breaker, dual 30 AAC bypass/input breakers)

• MMP250-60S

(Mini Magnum Panel, 250 ADC breaker, single 60 AAC bypass/input breakers)

Standard Features:

• Enclosure is steel construction with durable white powder coat

fi

nish

•  Battery/inverter DC disconnect breaker (175 or 250 amps)
•  Inverter AC input overcurrent protection breakers
•  Pre-wired AC bypass switch for inverter isolation/battery maintenance
•  Front mount AC and DC breakers for quick and easy operation
•  AC and DC ground screw type compression terminals (no lugs required)
•  500A/50mV DC shunt installed for easy connection to battery status monitor
• Easy

fi

eld wiring with front-mounted AC and DC input/output terminals

• Enclosure and components are UL/CSA certi

fi

ed and designated for indoor use

• Con

fi

gurations available for both single 120 VAC and 120/240 VAC systems

•  DC negative and ground busbars (negative can be isolated if PV-GFP device installed)
•  Battery positive busbar for DC loads and PV arrays included
•  Provides mounting for DIN rail or back-mounted DC load/disconnect breakers
•  Integrates directly with Magnum MS, MS-PAE, and RD Series inverters
•  Knockouts for inverter and battery cables, PV in/out, DC breakers
•  Stud terminal available for large DC wire if used as system ground
•  Data cables with 300-volt rated insulation to allow 240 VAC inverter installations
•  Inverter hood to allow a Magnum inverter to be mounted vertically

Physical Features:

•  MMP dimensions (H x W x D): 18” x 13” x 6.75” (45.7cm x 33cm x 17.1cm)
•  MMP weight: 22.5 lbs. (10.2 kg)
•  Shipping dimensions (H x W x D): 22” x 15” x 12.5” (56.9cm x 38.1cm x 31.8cm)
•  Shipping weight: 31.5 lbs. (14.3 kg)

Optional Accessories/Components:

• ME-RC

– Basic Remote Control with LCD display; allows inverter (or connected accessory) to be

con

fi

gured and monitored, and maintains the critical settings in non-volatile memory.

• ME-ARC

– Advanced Remote Control with LCD display; has all the features of the ME-RC

remote, but also con

fi

gures the advanced features of the inverter (or any connected accessory).

• ME-BMK-NS

– Battery Monitor; determines battery State of Charge (DC shunt not included).

• ME-AGS-N

– Automatic Generator Start Controller (Network version); automatically starts/

stops generators.

• BP-MMP

– Metal Backplate; for mounting the Magnum inverter and MMP enclosure, and is

UPS shippable. See Figure A6-1 in Appendix A for more speci

fi

c information.

• DC

Breakers

– Space for up to four E-Frame/back-mounted (1” width) or eight Q-Frame/DIN

rail-mounted (1/2” width) DC breakers.

• MMP-KP

– A top cover plate with knockouts to allow other (non-Magnum) inverter installations.

See Figure A4-1 in Appendix A for more speci

fi

c information.

«
...
9
10
11
12
13
...
»

Содержание Mini Magnum Panel







































































Отзывы:

Нет отзывов

Похожие инструкции для Mini Magnum Panel

ACS850-04 series

Бренд: ABB Страницы: 296

Бренд: ABB Страницы: 320

Бренд: ABB Страницы: 50

Бренд: ABB Страницы: 56

Бренд: D-Link Страницы: 113

Бренд: D-Link Страницы: 146

Бренд: D+H Страницы: 36

Бренд: D-Box Страницы: 4

Бренд: D+H Страницы: 36

Бренд: Talgil Страницы: 14

Бренд: Tadao Страницы: 2

FT-2000 - MENU MODE LIST

Бренд: Yaesu Страницы: 56

Бренд: Universal Remote Страницы: 20

Extinguishing Control Panel BC06-2EXT

Бренд: LST Страницы: 4

Бренд: Fuji Electric Страницы: 12

Бренд: heat-timer Страницы: 36

Бренд: Acumen Страницы: 6

Бренд: PCB Piezotronics Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды