3
© 2016 Sensata Technologies
Introduction
1
2
3
6
7
5
8
4
Figure 1-1, Components of the AGS-N Controller
STATUS Indicator: a bi-color (green or red) LED indicator
that illuminates to provide information on the AGS’s
operation.
TEST Button: a momentary pushbutton that allows the
AGS system to be tested for correct wiring and generator
start/stop operation.
Wiring Terminal Block: an 8-port friction-
¿
t connector
that powers the AGS and connects the generator’s start/
stop and run sense wires.
Mounting Flange: used to secure the AGS to a shelf or a
wall. Four black oxide #8 x 3/4 Phillips, pan head screws are
provided to mount the AGS.
READY Indicator: a green LED indicator that illuminates to
signal that the AGS is powered (
À
ashes if the optional temp
sensor is not connected).
NETWORK Connection Port (green label): a RJ14 port
(6P6C – 6-position, 6-contact female connection) that
provides the connection point for the network communication
cable.
REMOTE Connection Port (purple label): a RJ14 port
(6P6C – 6-position, 6-contact female connection) that
provides the connection point for the remote temp sensor
cable (Figure 2-3).
Internal Access Screws: four #6-32 x 3/8 Phillips screws
that must be removed to access the DC Input Jumper and
the 4-position DIP Switch.
5
6
7
4
3
2
1
8
1.3 ME-AGS-N
Features
The AGS module provides the generator’s wiring connections and
the following components (refer to Figure 1-1):