manualshive.com logo in svg

Magnum Dimensions ME-AGS-N, Руководство пользователя, Страница: 35 / 38

Поделиться
Скачать
Magnum Dimensions ME-AGS-N Скачать руководство пользователя страница 35

29

© 2016 Sensata Technologies

Appendix

6.0 Appendix

6.1 

Other Accessories and Equipment

Sensata offers a number of devices and accessories that can be used 

to expand and enhance your AGS and inverter/charger system.

6.1.1  Optional Accessories for the AGS-N

AGS Pigtail Adapters
Sensata Technologies offers two pigtail adapters for use with the 

AGS. They are used in applications that require you to automatically 

turn the generator on/off externally via a manually controlled switch, 

or from an automatically controlled switching device (i.e., using the 

A/C’s thermostat controls to turn on the generator in order to run 

the A/C unit, or a relay control circuit):
• ME-PT1 (pigtail one-wire) adapter allows the AGS to start the 

generator when an ex12-volt DC supply is applied.

• ME-PT2 

(pigtail two-wire) adapter allows the AGS to start the 

generator by an external two-contact switch.

Battery Monitor
The Battery Monitor Kit (ME-BMK) is a single battery bank AH meter 

that monitors the condition of the battery and provides information 

on much energy you have available. It also enables you to plan your 

electrical usage to ensure the battery is not being over-discharged.
MagWeb (device monitoring through the Internet)
The ME-MW-W (MagWeb Wireless) and the ME-MW-E (MagWeb Wired 

Ethernet) are used to remotely monitor inverters and accessories. 

The ME-MW-W connects to the Sensata network via a wireless data 

link and the ME-MW-E connects via a wired Ethernet data link. Both 

provide live internet monitoring of the inverter, battery monitor, 

and the AGS. Using an “always on” internet connection, the MagWeb 

system makes live and historical conditions available using a web 

browser and Sensata’s data transfer service.
Magnum Enclosures
The MP enclosures have been speci

¿

 cally designed to combine 

MS-PAE inverters when con

¿

gured for parallel operation. The MP 

enclosures feature convenient front-mounted AC and DC connections 

and easy panel operation using the optional ME-RTR router. The 

MMP enclosures are for single inverter applications. The MMP Series 

enclosures have been specially designed to combine all of the major 

components required for a renewable energy system into a single, 

easy to install pre-wired enclosure.
6.2 

AGS Revisions and Inverter Compatibility

When an AGS is released with a new software revision, some of the 

features/functionality in the new AGS may not be available in an 

inverter or remote control with an earlier software version. Refer 

to your remote owner’s manual to see what features are available.

Содержание ME-AGS-N







































Отзывы:

Нет отзывов