Magni Gyro M-16 C, Руководство по эксплуатации самолета

Страница: 61 / 105

Page 61
025-00-16C M16C FLIGHT MANUAL, Issue G
02 March 2016
RADIO CALL - On request
3.8.2 CHECK OF TAXIING AREA
MOVEMENT AREA - Free
ROTOR BRAKE - ON, brake lever raised, brake warning
light on
ROTOR - Check dimensions, rotor along longitudinal axis
BRAKES - Check effectiveness
FLIGHT INSTRUMENTS
– Check
WARNING:
The nose wheel is fixed mechanically to the rudder pedals through the steering system. Do
not press the pedals too much as long as the gyroplane is standing still. The brakes must be
used only at the end of the landing roll or when stopping the gyroplane during the taxiing
operations, and only with the engine at minimum r.p.m.
NOTE:
Fig. 3.8/2 shows the minimum steering radius.
3.8.3 TAXIING TO TAXI-HOLDING POINT
(See fig. 3.8/3)
Purpose Move the gyroplane from the parking area to the taxi-holding point.
Preparation Control stick all forward.
Start engine.
Visually check external freedom of movement.
Execution Identify runway to use.
Gently vary the throttle to start taxiing to taxi-holding point.
Manage steer with rudder pedals
Manage taxiing with throttle lever and brakes
Always stop gyroplane before crossing runway and make sure there is no traffic before
crossing
Stop gyroplane at taxi-holding point.
WARNING:
Fast taxiing on rough grass is not recommended which may cause excessive loadings and
deflections of the rotor blade.