9
A G E N C Y A P P R O V A L S
These devices are in compliance with the RED-directive 2014/53/EU, the EMC directive 2014/30/EU,
the PED-directive 2014/68/EU, the ATEX directive 2014/34/EU and RoHS directive 2011/65/EU.
Explosion Proof
US/Canada:
FM17US0108X / FM17CA0055X
Class I, Div 1, Group B, C, D, T4…T1
Zone 1 A Ex db ia IIB+H2 T4…T1
Zone 1 Ex d ia IIB+H2 T4…T1
Ta = -40 ºC to +70 ºC
Type 4X, IP67
Flame Proof
ATEX – FM17ATEX0027X
II 1/2 G Ex db ia IIB + H2 T4…T1 Ga/Gb
Ta = -40 ºC to +70 ºC
IP67
IEC- IECEx FMG 17.0012X
Ex db ia IIB + H2 T4…T1 Ga/Gb
Ta = -40 ºC to +70 ºC
IP67
Non- Incendive
US/Canada:
FM17US0108X / FM17CA0055X
Class I, II, III, Div 2, Group A, B, C, D, E, F, G, T4…T1
Class 1, Zone 2 AEx nA ia IIC T4…T1
Class 1, Zone 2 Ex nA ia IIC T4…T1
Ta = -15 ºC to +70 ºC
Type 4X, IP67
ATEX - FM17ATEX0028X
II 3 G Ex nA IIC Gc T4…T1
Ta = -15 ºC to +70 ºC
IP67
IEC – IECEx FMG 17.0012X
Ex nA IIC Gc T4…T1
Ta = -15 ºC to + 70 ºC
IP67
Intrinsically Safe
US/Canada:
FM17US0108X / FM17CA0055X
Class I, II, III, Div 1, Group A, B, C, D, E, F, G, T4…T1
Class I, Zone 0 AEx ia IIC T4…T1
Class I, Zone 0 Ex ia IIC T4…T1 Ga
Ta =-40 ºC to +70 ºC
Type 4X, IP67
ATEX – FM17ATEX0027X:
II 1 G Ex ia IIC T4…T1 Ga
Ta = -40 ºC to +70 ºC
IP67
IEC – IECEx FMG 17.0012X:
Ex ia IIC T4…T1 Ga
Ta = -40 ºC to +70 ºC
IP67
Dust Ignition Proof
US/Canada:
FM17US0108X / FM17CA0055X
Class II, III, Div 1, Group E, F, and G, T4…T1
Ta = -15º C to +70º C
Type 4X, IP67
ATEX – FM17ATEX0027X:
II 2 D Ex ia tb IIIC T100º C Db
Ta = -15º C to +70º C
IP67
IEC – IECEx FMG 17.0012X:
Ex ia tb IIIC T100º C Db
Ta = -15º C to +70º C
IP67
FM3600:2011, FM3610:2010, FM3611:2004, FM3615:2006, FM3616:2011, FM3810:2005, ANSI/ISA60079-0:2013,
ANSI/ISA 60079-1:2015, ANSI/ISA 60079-11:2013, ANSI/ISA 60079-15:2012, ANSI/ISA 60079-26:2011, NEMA 250:2003,
ANSI/IEC 60529:2004, C22.2 No. 0.4:2009, C22.2 No. 0.5:2008, C22.2 No. 30:2007, C22.2 No. 94:2001, C22.2 No. 213:2012,
C22.2 No. 1010.1:2009, CAN/CSA 60079-0:2011, CAN/CSA 60079-1:2011, CAN/CSA 60079-11:2014, CAN/CSA 60079-
15:2012, C22.2 No. 60529:2005, EN60079-0:2012, EN60079-1:2014, EN60079-11:2012, EN60079-15:2010, EN60079-26:2007,
EN60079-31:2009, A1:1991-2000, IEC60079-0:2011, IEC60079-1:2014, IEC60079-11:2011, IEC60079-15:2010,
IEC60079-26:2006, IEC60079-31:2008
“This equipment with chargeable non-conductive parts, e.g. enclosure’s paint and antenna use PTFE, Co-polymer
Polypropylene or Noryl En265, is provided with a warning label referring to the safety measures that must be taken if there is
electrostatic charging during operation. For use in hazardous area, the equipment and side to be installed, e.g. tank, must be
connected to earth and be attention to not only the measuring object, e.g. liquids, gases, powders and etc., but also the related
conditions, e.g. tank container, vessel and etc. (According to IEC 60079- 32-1).”
FCC (ID# LPN-R86) Compliance Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
Telecommunications Approvals
Agency
In-Tank
Out of Tank
FCC
47 CFR, Part 15, Subpart C, Section 15.209
Unintentional Radiators
47 CFR, Part 15, Subpart C, Section 15.256
ISED
RSS-211
RSS-211
ETSI
EN 302 372 V2.1.1 (2016-12)
EN 302 729 V2.1.1 (2016-12)