Physical Installation
● Assembly
and Mounting
CONTOUR Operating Instructions © 2013 Magnetrol International all rights reserved
13
Communications
Route communication cables in proper conduits and use a proper cable type.
The cable used for RS-485 should be of twisted-pair type, shielded, with 120 Ohm
impedance and approved for RS-485 communications.
The cable used for 4-20 mA should be rated for analog signals, twisted-pair, low
resistance and shielded.
3.4
Assembly and Mounting
Package Contents
The supplied package includes:
CONTOUR sensor
Documentation
CD with the CONTOUR Configurator software and marketing materials
Cable glands accessory kit
Ex-specific safety instructions (with Ex versions)
Certificates if applicable
Included components
The CONTOUR includes the following components:
CONTOUR Body
CONTOUR Head
CONTOUR Body: Includes three antennas, transducers and temperature sensor. The
flange is mounted on the body and tightened to it.
CONTOUR Head: Includes the electronic board with LCD display and all wiring
connections. The Head is mounted on the body.
