Appendix A: Onboard Configuration
● Output Settings
26
CONTOUR Operating Instructions © 2013 Magnetrol International all rights reserved
Appendix A: Onboard Configuration
Output Settings
This function defines the scanner Polling Address, and further to Measured Parameter
settings. Navigate down at the Main Menu screen using the
key, select the
Output
Settings
option and press to enter the Output settings menu.
The first screen of Output Settings allows setting
the scanner polling address.
Select the proper
Polling Address
using the
/
keys, and press to proceed.
Exiting this menu automatically switches to the
Measured Params. menu.
The following functions set displayed measurement units for Distance, Level, Volume,
Temperature and their maximum allowed values. As well, it allows reading the current
measurements for Analog Output, SNR and Temperature. This menu is not accessible
from the main menu. It will appear following completion of the Output Settings or the
Display Settings menus.
Navigate up/down the menu using the
/
keys, and Press to select the desired option.
Measurement Distance settings
Select the
Distance
option and press to
proceed.
Polling Address 40
00
Measured Params. 50
→
Distance
Level
Volume
Measured Params. 50
→
Distance
Level
Volume
1
