IMPULSE®•G+/VG+ Series 4 24 V Power Supply Installation Manual - November 2011
1-20
5.
Firmly plug the end of the connection cable into the CN19 connection port on the drive.
Figure 15: Plug in the Connector (2085-G+/VG+S4)
6.
Align the connector tabs on the option with the insertion tabs on the drive as shown in Figure 16.
NOTE:
Take proper precautions when connecting the option so the option will easily fit onto the
drive. Make sure the connector cable is not pinched between the option and the drive.
Figure 16: Tab Locations
N O T I C E
Make sure the connector is facing in the proper direction when plugging it into the drive. An
improper connection can damage the connector and the drive.
