Enrange Mini-MBT Instruction Manual
June 2015
Page 18 of 37
3.7.2 Command Confirmation
Each time the user operates a control on the transmitter, a message will be displayed on the graphic user
interface screen confirming what is being operated.
3.7.3 Battery Life Indicator
Remaining battery life is displayed on the bottom of the graphic user interface screen.
Battery life is displayed in 10% increments.
3.7.4 Signal Strength Indicator
The Signal Strength Indicator shows the radio signal strength at the receiver.
The Signal Strength Indicator is only available in systems equipped for Two-Way feedback (systems
utilizing the 433 MHz frequency band do not have Two-Way feedback available). For such systems,
Signal Strength is displayed at the bottom right hand corner of the graphic user interface screen.
3.7.5 Two-Way Feedback System
This option allows the user to view various parameters that may be important to the operation of the
equipment on the graphic user interface display screen.
Parameters such as engine RPM, the torque or speed of a drive, temperature, current, or any other useful
values can be sent from the receiver and displayed on the transmitter.
NOTE: Systems utilizing the 433 MHz frequency band do NOT have Two-Way feedback available.
3.8 JOYSTICKS AND PADDLES/LEVERS
To activate the desired motor functions, operate the Joystick or Paddle/Lever that corresponds to the
desired motion.
To activate higher speed functions for those transmitter models so equipped, operate the Joystick or
Paddle/Lever further to activate the desired speed.
3.9 ROTARY SELECTOR SWITCH
The rotary selector switch can be used to select various modes of operation.
A rotary switch can have 2 to 12 positions to select from.
3.10 AUXILIARY SWITCHES
These switches activate special function relays that control items such as grab attachments, magnets,
lights, and etc.
The auxiliary switches can be momentary or latched.
