Magnetek Flex 12EX2 Скачать руководство пользователя | Manualshive

Страница: 16 / 56

background image

Flex 12EX2 Standard, AB and Tandem Instruction Manual

November 2017

Page 16 of 56

4 Function Settings

4.1 Transmitter

4.1.1

Transmitter Firmware Version

1. Rotate the power switch key to OFF ( 0 ) position.

2. With the STOP button elevated, press and hold PB1 and PB3

at the same time.

3. Rotate the power switch key to ON ( I ) position.

4. Release PB1 and PB3 at the same time. The Status LED

displays firmware version with red, green and orange blinks.

5. Exit Firmware Version mode by rotating the power switch key

to OFF ( 0 ) position.

4.1.2

Transmitter Channel Settings

A.

Unassigned Channel Scheme (no preset system channel)

When both transmitter and receiver are set to unassigned channel scheme (no
preset channel), the system automatically searches and locks onto a free and
uninterrupted channel at every transmitter startup.

NOTE:

Pitch and catch, tandem, and receiver select configurations are unable to be

set to the unassigned channel scheme.

1. Rotate the power switch key to OFF ( 0 ) position.

2. With the STOP button elevated, press and hold PB1 and PB2

at the same time.

3. Rotate the power switch key to ON ( I ) position.

4. Release PB1 and PB2 at the same time. The system will enter

Channel Setting mode. The Status LED displays current
channel setting with red and green blinks. A green blink
represents the tens (+10) and a red blink represents the units
(+1). For example, 1 green blink followed by 5 red blinks is
channel 15. Channel unassigned is represented by solid orange on the Status LED.

5. Change transmitter channel to “channel unassigned” by pressing PB4 one time

(Status LED displays solid orange).

6. Transfer “channel unassigned” setting to the receiver by rotating and holding the

power switch key at START position until the Status LED turns to solid green (transfer
complete). Turn off the transmitter power if solid green is not shown on the Status LED
after more than 10 seconds (transfer incomplete); the transmitter will revert back to its
previous channel setting. Make sure the receiver power is turned on and the receiver
is within the operating distance during the entire process. When transmitter is set to
“channel unassigned” the receiver must also set to “channel unassigned” in order for
the entire system to work.

7. Exit Channel Setting mode by rotating the power switch key to OFF ( 0 ) position.

«
...
14
15
16
17
18
...
»

Содержание Flex 12EX2

























































Отзывы:

Нет отзывов

Похожие инструкции для Flex 12EX2

Бренд: UNITED Страницы: 22

Бренд: Daikin Страницы: 2

Бренд: Daikin Страницы: 12

Бренд: Daikin Страницы: 12

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 21

Бренд: Daikin Страницы: 20

ROBO Cylinder RCP2 Series

Бренд: IAI Страницы: 5

Бренд: tams elektronik Страницы: 12

Бренд: MAKOT Страницы: 6

Бренд: Paradox Страницы: 6

Бренд: 2gig Technologies Страницы: 6

Бренд: Gemini Страницы: 9

Бренд: M-system Страницы: 18

Бренд: Bardac drives Страницы: 2

Sundstrom SR307

Бренд: S.E.A. Group Страницы: 5

Бренд: Zero 88 Страницы: 34

750-429/040-001

Бренд: WAGO Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды