Magnescale SR138-025R, Инструкция по эксплуатации

Страница: 76 / 180

24 (E)
English
<12> Removal of the scale unit
When removing a mounted scale unit from the machine, be sure
to secure the slider part to the scale part with the slider holder.
Follow the numerical sequence.
Fig. 3-23 Removing a scale unit
Securing the slider part to the scale part keeps the alignment of
the scale part and slider part after removal from the machine and
makes reinstallation easy.
2
Secure the slider part using four M2.6 cap screws.
3
Loosen screws and
remove them from
machine.
1
Peel off the
screening plate.
<11> Connecting the interface unit to a
controller
1
Use the screw (M3
×
5) to mount the supplied fixing plate to
the interface unit.
2
Use the supplied screw (M4
×
5) to secure
1
to the mounting
surface.
Note
Prepare two M4 tap holes on the mounting surface.
Fig. 3-22
20/0.79"