Magnescale SR138-025R, Инструкция по эксплуатации

Страница: 61 / 180

(E) 9
English
B A
Fig. 3-1 Scale unit mounting direction
When mounting the scale unit vertically, be sure to mount the
slider part of the scale unit on the opposite side of a workpiece or
cutting tool.
Scale part
Fig. 3-2 Mounting the scale unit vertically
Slider part
Cutting tool
Recommended
3-2. Mounting Precautions
Note
Be sure to ground the scale unit and the slider part to prevent
trouble to noise.
3-2-1. Checking the mounting method
Check that the scale unit can be mounted in the relative position
shown in the Fig. 3-1.
* Do not mount the scale in any other direction since difficulties
with servicing and maintenance may arise.
(The mounting position A in particular is recommended:
cutting fluid and chips may be effectively kept out.)
(The mounting position B is possible only when cutting fluid
and chips will not get inside the scale.)