Magnescale SmartSCALE SQ57-Z Series, Руководство пользователя

Страница: 48 / 84

16
(E)
SQ57-Z Series, CH22 Series
3-5. Version Numbers of a Controller
Be sure to use the following combination of the controller version numbers when using the magnescale
that supports the SIEMENS DRIVE-CLiQ.
SINUMERIK soft ware version : 4.4SP2 or later
SINAMICS fi rmware version
: 4.4SP1 or later
Th e functions of the controller may be restricted with any combinations other than the above.
As for details of the versions and functions of the controller, contact SIEMENS.
For models that support the online diagnosis function
Th e product basic functions operate normally with the soft ware above.
However, when using the online diagnosis function, the following soft ware version is required.
SINUMERIK
soft ware version: 4.5 or later
Our dedicated online diagnosis soft ware (supplied separately) is required.
Please contactus for details of the online diagnosis function.
4. Output Signal
4-1. Signal Specifi cation
Th is product performs data communication with the controller using the SIEMENS DRIVE-CLiQ
protocol.
Moving the scale head in the direction of the arrow gives an addition. (po)
Fig. 4-1
4-2. Controller Connection Specifi cations
Communication circuit side
When connecting to a controller, be sure to follow the connection procedure of the controller manufacturer.
(See “3-4. Wiring Connections with a Controller”)