3/12
LH70 initial Setup Manual
Items
Indication
Description
Setting
Display resolution
and polarity
Sets the resolution to be displayed for each
axis. A value lower than the input resolution
cannot be set. Selects the value for each
axis, including the polarity (+/-).
The default value is set by the basic setting.
Length: 0.05 to 100μm
or
Angle: 1 second to 1 degree
Display switching
Each display axis can be selected for the
length measurement unit input axis.
Input axis:
IN-1: 1st input axis
IN-2: 2nd input axis
IN-3: 3rd input axis
IN - -: No display
Axis label switching
Upper
：
X
Middle
：
Y
Display axis label selection
Upper axis: "X" or "Z"
Middle axis: "Y" or "Z"
Error compensation
Setting of linear compensation
Err OFF
：
off
Lin Err
：
linear compensation
±
600μm/m
*Expanded selections
±
1000μm/m
Flicker control
Flickering of the smallest displayed digit
can be suppressed. Set the level of flicker
suppression.
OFF: Function stop
1: Weak
2: Strong
Sleep
The display turns off when there is no
movement of the length measurement unit
or key operation for a certain period of time
while the power is on.
It will return when the length measurement
unit is moved or the Key operation is
performed again.
OFF: Do not put to sleep
1: 1 minute later
5: 5 minutes later
10:10 minutes later
30:30 minutes later
60: 60 minutes later
Can be used with LH70-1 and LH70-2.
Preparations before making the initial setting (2/2)
Check the usage conditions for Detailed Settings.
(Since the setting conditions can be changed later, use the default values to skip items for which
the conditions have not been confirmed)
default
Upper axis
Middle axis
Lower axis
Detailed Setting Items
