MAGNAWELD monoTIG 160i, Руководство пользователя

Страница: 22 / 84

22
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
EN
monoTIG 160i / monoTIG 200i
• If the Thermal Protection LED lights up while cooling fan is working and the machine doesn’t weld; machine
maybe overheated and stopped for auto protection due to overheat. Hot weather or working in high current values
for long time may cause this. Let the machine on for a while in order to cool down itself with the cooling fan. After
its cools enough, Thermal Protection LED fades away and the machine can weld.
• When the lamp of power switch is lighting, cooling fan is working but the machine does not weld; turn off the
machine for 1 minute then turn it on again and try to weld. If it still doesn’t weld, contact to your authorized
technical servise.
4.2 Troubleshooting
4.3 Error Codes
Maintenance and Service
• Check visually whether the fan is
working or not
• If the problem continues, contact the
authorized service
• Open the front of the air ducts
• If the problem continues, contact the
authorized service
• Fan may not be working
• The front of the air inlet-outlet ducts
may be blocked
• The machine working environment
may be too hot or stuffy
• The uptime of your machine may have
been exceeded
• Make sure that the working
environment of the machine is not
excessively hot or stuffy
• If the problem continues, contact the
authorized service
• Allow the machine to cool down by
waiting for a while. If the fault
disappears, try to use the machine at
lower amperage values
• If the problem continues, contact the
authorized service
E01
E02
Thermal
Protection
(Primary)
• Check the mains connection cables
and the voltage. Make sure the
correct voltage input is provided.
If the mains voltage is normal,
contact the authorized service
• Mains voltage may have decreased
E03
Mains Voltage
Low
• Check the mains connection cables
and the voltage. Make sure the
correct voltage input is provided.
If the mains voltage is normal,
contact the authorized service
• Mains voltage may have increased
Mains Voltage
High
Error Code Error Cause Solution