MAGNAWELD monoTIG 160i, Руководство пользователя

Страница: 12 / 84

12
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
EN
monoTIG 160i / monoTIG 200i
1.3 Product Label
Duty Cycle
X
Open Circuit Voltage
U 0
Rated Welding Current
I 2
Mains Voltage and Frequency
U 1
Protection Class
IP23S
Rated Welding Voltage
U 2
Rated Power
S1
Rated Mains Current
I 1
Single Phase Transformer Rectifier
MMA Welding
TIG Welding
Direct Current
Vertical Characteristic
Mains Input 1-Phase Alternating Current
Suitable for Operation at Hazardous
Environments
Technical Information
As defined in the standard EN 60974-1, the duty cycle rate includes a time period of 10 minutes.
For example, if a machine specified as 250A at %60 is to be operated at 250A, the machine can weld / cut
without interruption in the first 6 minutes of the 10 minutes period (zone 1). However, the following
4 minutes should be kept idle for the machine cool down (zone 2).
Duty Cycle
Temperature (C°)
6 min. 6 min. 6 min. 4 min. 4 min. 4 min.
Time (min.)