MAGNAWELD monoTIG 160i, Руководство пользователя

Страница: 16 / 84

16
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
EN
monoTIG 160i / monoTIG 200i
TIG torch connection via CX79 TIG torch adaptor
• Thread the nut of the torch through the plastic body and screw to the torch plug tightly. Then place the torch
plug into the plastic body.
• Thread the L shape gas hose adapter through the hole on plastic body and screw it to the socket tightly.
• Connect the gas hose to the elbow union wiht the clamp tightly.
• Install the connector pins to the control cables of the torch.
2.3.3 Preparing the Torch Connections
2.3.4 Torch Connections
• Connect the earth cable plug to the positive welding socket tightly.
• To increase the quality of the welding, connect the earth clamp tightly to
the work-piece as close as possible to the welding area.
2.3.5 Earth Clamp Connections
Figure 4 : TIG Welding Connections
a
b
Installation
• Insert the TIG torch’s plug into the negative pole welding socket and tighten it by turning to the right. Attach the
torch trigger connector that came with the machine to the trigger control cables of the torch. Then connect the
connector to the trigger control socket.
• Connect the gas hose of the torch to the gas outlet.
• In water-cooled models, connect the cold “blue” hose of the torch to the cold water outlet on the machine, and
the hot “red” hose to the hot water inlet on the machine.