LPCM Output 41
If you connected the DVD Player to a Stereo using the COAXIAL jack as
shown on page 15, you may need to adjust LPCM OUTPUT.
Discs are recorded in a certain sampling rate. The higher the sampling rate,
the better the sound quality. Some Discs are recorded in a high sampling
rate of 96 kHz. Set LPCM OUTPUT to 96K if you are playing Discs
recorded at this high rate. Otherwise, set LPCM OUTPUT to 48K.
1
Press SYSTEM MENU.
2
Press
2
to select the AUDIO SETUP PAGE icon at the top
of the menu. Press OK or
4
.
3
Press
4
to select DIGITAL AUDIO SETUP, then press OK.
4
Press
4
to select LPCM OUTPUT, then press
2
.
5
Press
3
or
4
to select 48K or 96K, then press OK.
Your
selection will be highlighted in brown.
6
Press SYSTEM MENU to remove the menus.
1,
6
2-
5
