11
GETTING STARTED
1. Place the TV on a sturdy surface.
Note:
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation
openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or
in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping
or splashing.
2. Connect the antenna to the TV jack on the rear of LCD TV
3. Battery Installation:
Remove the battery compartment lid. Place 2 AAA batteries in the remote.
4. Plug the DC adaptor into DC IN 12V jack on the LCD TV
Plug the power cable into an outlet and switch TV set on.
5. Press the
ÐÑÉÛÎ
button to turn on the TV
6. Run the Auto Scan function to install your LCD TV channels (Refer to Page15)
Û²º±½«- ͱº¬©¿®» ó Ý«-¬±³»® Í«°°±®¬
