DIGITAL TUNER (RADIO) OPERATION
Basic Operation
1. Press the FUNCTION button on the main unit or remote to choose the
Tuner function.
2. Press the STOP button on the main unit or remote to choose either AM
or FM radio.
3. Press the TUNE UP or TUNE DOWN buttons on the main unit or
remote to manually change the radio station you are listening to.
4. To scan for the next available radio station, hold the TUNE UP or
TUNE DOWN button for two seconds. When the tuner finds the next
available radio station, the broadcast will begin to play automatically.
Setting Preset Radio Stations
1. Press the PRESET button on the main unit or the M+/- (Left/Right
navigation) buttons on the remote to choose a preset station number,
you may preset up to 20 stations.
2. Press the TUNE UP or TUNE DOWN buttons on the main unit or
remote to select a frequency to store.
3. Press the STORE button on the main unit or remote TWICE to store
the selected frequency.
4. Repeat the process to store the rest of your chosen preset radio
stations.
5. To recall your selected radio stations, press the PRESET button on the
main unit or the M+/- (Left/Right navigation) buttons on the remote to
cycle though all presets.
AUXILIARY INPUT
Any audio signal can be input and played through the DVD player as an
amplifier, via the right and left auxiliary inputs.
1. Press the FUNCTION button on the main unit or remote several times
to select AUX mode.
2. Insert the auxiliary plugs into the DVD players right and left AUX IN
jacks on the back of the DVD player, and the opposite, smaller end into
the jack of your audio device. (Example: headphone jack of a MP3
player)
3. Press PLAY on your selected audio source.
4. Adjust the volume using the DVD players’ volume control; the volume
control of the audio source will not affect the sound while plugged into
the DVD player.
- 14 -
